Sony SAT-A4 Operating Instructions (primary manual) Operating Instructions Manual page 80

Back Panel (SAT-B3)
Connector
SATELLITE IN
LOW SPEED DATA
VCR CONTROL
AUDIO (R)/(L)
OUT
VIDEO OUT
S-VIDEO OUT
CH3/CH4 Switch
VHF/UHF IN
VHF(SAT)/UHF OUT
TEL LINE
AC IN
80
Description
Connects to the LNB on the Satellite Antenna.
Allows you to connect your Digital Satellite Receiver to new
technologies, as they are introduced. Additional accessories may
be required.
Sends IR signal from Digital Satellite Receiver to VCR. Allows
the Digital Satellite Receiver to automatically control your
VCR's recording functions when you record a program.
Connects your Digital Satellite Receiver to the right and left
audio inputs of your audio or video component.
Connects your Digital Satellite Receiver to your TV or VCR's
video input.
Allows you to connect your Digital Satellite Receiver directly
to your TV (if your TV has S-VIDEO IN).
When you use an RF connection, this setting determines the
TV channel on which programs from the Digital Satellite Receiver
can be viewed.
Allows you to connect your Digital Satellite Receiver to your
normal (terrestrial) TV or cable TV service.
Connects to your TV or VCR.
Connects your Digital Satellite Receiver to a telephone jack.
This allows you to order pay per view programs.
Connects your Digital Satellite Receiver to a 120V AC outlet.
Cable Type
Solid Bare Copper
RG-6 Coaxial
(75-ohm/F-type)
Depends on future
applications
(D-sub 9 pin)
Audio mono
miniplug
Audio (2)
(RCA-type)
Video
(RCA-type)
S-Video
(4-pin mini DIN)
RG-59 Coaxial
(75-ohm/F-type)
RG-59 Coaxial
(75-ohm/F-type)
Telephone (RJ-11)
AC