Other Symbols - GE Datex-Ohmeda S/5 Technical Reference Manual

1.1.4 Other symbols

SN, S/N
- BIS: On the Aspect DSC indicates the following caution:
CAUTION The converter must not be opened for any reason or
autoclaved.
- On the Interface Module E-INT indicates that it is for connecting external
devices. Do not connect patient cables to the module.
Type BF (IEC 60601-1) protection against electric shock.
Type BF (IEC 60601-1) defibrillator-proof protection against electric shock.
Type CF (IEC 60601-1) protection against electric shock.
Type CF (IEC 60601-1) defibrillator-proof protection against electric shock.
When displayed in the upper left corner of the screen, indicates that the alarms
are silenced. When displayed in the menu or digit fields, indicates that the alarm
source has been turned off or alarm does not meet the alarm-specific activation
criteria.
ESD warning symbol for electrostatic sensitive devices. Pins of connectors
identified with the ESD warning symbol should not be touched. Connections
should not be made to these connectors unless ESD precautionary procedures
are used. For details, see section
Symbol for non-ionizing electromagnetic radiation. Interference may occur in
the vicinity of equipment marked with this symbol.
Equipotentiality. Monitor can be connected to potential equalization
conductor.
Alternating current
Fuse. Replace the fuse only with one of the same type and rating.
Serial Number
Connector for color display
"1.2.2. ESD precautionary
Introduction
procedures".
Document no. M1137263-04
7