Creating Your Own Program; Program Play - Sony CMT-WS2D Operating Instructions Manual

Creating your own
program

— Program Play

You can make a program of up to 99 steps.
1
Press
The Control Menu appears.
2
Press M or m repeatedly to select
"PROGRAM", then press ENTER.
The options for "PROGRAM" appear.
3
Press M or m repeatedly to select "SET
t
", then press ENTER.
Program list
4
Press ,.
The cursor moves to the track list (in this
case, "01").
16 GB
DISPLAY in stop mode.
Total playing time of the
programmed tracks
Track list on the disc
5
Press M or m repeatedly to select the
track you want to program, then press
ENTER.
The selected track is programmed and the
cursor moves to the program list.
For example, select track "02".
The track number may be displayed in 3
digits for a Super Audio CD.
Selected track
Total playing time of the programmed tracks
6
Repeat steps 4 to 5 to program other
tracks.
The programmed tracks are displayed in the
selected order.
7
Press H.
Program Play starts.
Other operations
To
Turn off the Program
Display
Check the program
To cancel Program Play
Press CLEAR, or select "OFF" in step 3. To play
the same program again, select "ON" in step 3,
then press ENTER.
To change a programmed track
1
After step 3, press M or m repeatedly to
select the programmed track you want to
change, then press ,.
2
Press M or m repeatedly to select the track
you want to program, then press ENTER.
The selected track in the program list is
replaced by the newly selected track.
Do this
Press DISPLAY.
Perform steps 1 to 3.