Listening To Audio From A Connected Component - Sony CMT-WS2D Operating Instructions Manual

D COMPONENT VIDEO OUT
jacks
Use a video cord (not supplied) to connect a TV.
If your TV accept progressive format file
signals, you must use this connection and set the
"PROGRESSIVE" setting to "PROGRESSIVE
AUTO" or "PROGRESSIVE VIDEO"
(page 35).
E VIDEO OUT jack
Use a video cable (supplied) to connect the
video input of TV to this jack.
F S VIDEO OUT jack
Use an S video cord (not supplied) to connect an
optional TV to this jack. You can enjoy higher
quality video images.
56 GB
Listening to audio from a
connected component
Use buttons on the unit for the operation.
1
Connect audio cords.
See "Hooking up optional components" on
page 55.
2
Press VIDEO/SAT to switch the
function to "VIDEO" or "SAT".
3
Start playing the connected
component.
Notes
• If you cannot select "SAT", by pressing VIDEO/
SAT, hold down VIDEO/SAT, then press
the power is on. The function will change from
"VIDEO" to "SAT", and "SAT" will appear in the
display. To change back to "VIDEO", repeat the
same procedure.
• If the sound is distorted or too loud when "VIDEO"
is selected or you want to switch back to "SAT",
repeat the operation described above to switch to
"SAT".
?/1
while