Optional Components; Controlling The Tv With The Remote; Using The Theatre Sync Function - Sony CMT-WS2D Operating Instructions Manual

Optional Components

Controlling the TV with the
remote
You can use the following buttons on the remote
to operate a Sony TV.
To
Turn the TV on or off
Switch the TV's input
source between the TV
and other input sources
Change the TV channels TV CH +/– or the number
Adjust the volume of
the TV speaker(s)
Using the THEATRE SYNC
function
THEATRE SYNC allows you to turn on your
SONY TV and this system, change the system
mode to "DVD", and then switch the TV's input
source you set with one button push.
Use the remote for the operation.
1
Press and hold TV/VIDEO while
entering the code for the TV's input
source connected to this system (see
the table below) using the number
buttons.
TV's input source is selected.
Number
0
1
2
3
4
5
6
7
54 GB
Press
TV ?/1 while holding
down the TV button
TV/VIDEO while holding
down the TV button
buttons while holding down
the TV button
TV VOL +/– while holding
down the TV button
TV's input source
No input source (Default)
VIDEO1
VIDEO2
VIDEO3
VIDEO4
VIDEO5
VIDEO6
VIDEO7
Number TV's input source
8 VIDEO8
9 COMPONENT 1 INPUT
CLEAR COMPONENT 2 INPUT
ALBUM – COMPONENT 3 INPUT
ALBUM + COMPONENT 4 INPUT
2
Press and hold TV CH + while entering
the code for transmit time (see the
table below) using the number buttons.
The transmit time from the remote is
selected.
Number Transmit time
1 0.5 (Default)
2 1
3 1.5
4 2
5 2.5
6 3
7 3.5
8 4
Notes
• This function is only for SONY TV series, however,
some TV products may also not work.
• If this function does not work, change the transmit
time. The transmit time varies depending on the TV.
• If distance between the TV and this system is too far,
this function may not work. Install the system near
the TV.
• Keep the remote pointed in the direction of the TV
and this system.