Toshiba MMD-AP 1HF2UL Series Manual page 17

E15-3S2
Case of RBC-AMT54E-UL
Room A
1
2
1
[ MENU] button
Displays the menu screen.
2
[ CANCEL] button
Functions as indicated on the screen, such as returning to the previous
menu screen.
∧
3
[ ] button
During normal operation: adjusts the temperature.
On the menu screen: selects a menu item.
4 ∨
[ ] button
During normal operation: adjusts the temperature.
On the menu screen: selects a menu item.
5
[ F1] button
Varies its function according to the setting screen.
6
[ F2] button
Varies its function according to the setting screen.
12:00
75
Cool
Mode Fan Speed
3,4
Field setting menu
1.Test mode
2.Register service info.
3.Alarm history
4.Monitor function
5.Setting louver position
Return
5
DN setting
Code
6
(DN)
10 0000
Return Fix
<
DN setting
Code
(DN)
10 0001
Return Fix
<
DN setting
Continue?
Return
Yes
 All Outside Air Unit connection setting
When only Outside Air Units connected to Outdoor unit, set the all Outside Air
Unit connection setting at Outside Air Units.
Firstly, follow to the basic operation procedure
(1→2→3→5)
• For the CODE No. in Procedure
• For the [SET DATA] in Procedure
Secondary, follow to the basic operation procedure
(3→5)
• For the CODE No. in Procedure
• For the [SET DATA] in Procedure
Finally, follow to the basic operation procedure
(3→6)
• For the CODE No. in Procedure
• For the [SET DATA] in Procedure
CODE No.
C8
AE
AF
17
MMD-AP___1HF2UL
1
Push the [
display the menu screen.
2
Push and hold the [
button and the [
the same time to display the "Field
setting menu".
 Push and hold the buttons for more
than 4 seconds.
Set
3
Push the [
button to select "7. DN setting" on
the "Field setting menu" screen, then
Data
push the "
[ F2] button.
 The fan and louver of the indoor unit
operate. When the group control is
used, the fan and louver of the
>
selected indoor unit operate.
 Move the cursor to select "Code
(DN)" with the "
[ F1] button, then set "Code
(DN)" with the [
∨
Data
] button.
 Move the cursor to select "Data" with
>
the "
button, then set "Data" with the [
∧
] / [
>
4
Refer to the Installation Manual
supplied with the indoor unit or
service manual for details about the
Code (DN) and Data.
5
Push the [
the other Code (DN) and Data. After
"Continue?" is displayed on the
screen, push the "
[ F1] button.
No
6
Push the "
F2] button to finish the setting
operation. "
the screen for a while, then the
screen returns to the "Field setting
menu" screen.
 Pushing the "
F2] button displays the unit
selection screen when the group
control is used. Push the [
CANCEL] button on the unit
selection screen to finish the setting
operation. "
the screen for a while, then the
screen returns to the "Field setting
menu" screen.
3
is [C8].
3
is [0000].
3
is [AE].
3
is [0016].
3
is [AF].
3
is [0010].
SET DATA
0000
0016
0010
MENU] button to
MENU]
∨
] button at
∧ ∨
] / [ ]
Set"
Set
<
<
"
∧
] / [
>
" [ F2]
∨
] button.
MENU] button to set
Yes"
Yes
No" [
No
Setting" appears on
No" [
No
Setting" appears on