Table of Contents
Advertisement
Checking After Powering on
1
Powering on the Device
1
Check whether the input voltage is right, and ensure earth connection is essential .
2
Power on the power supply device in the
equipment room.
2
Checking the Status of Indicators
After the device is started, check the indicators on the front panel according to the following table.
Indicator
Color
SYS PWR
Green
SYS ACT
Green
FAN
Green
ALM
Red
After the power-on checking, you can configure the EGW2100 through the Console interface. Log in to the
Console interface with the initial user name admin and password Admin@123.
3
Push the power switch of the EGW2100 to the
On (|) position.
Description
On: PWR is working properly.
Off: The power supply PWR fails or has no connection.
On: The system is faulty.
Off: The system is faulty or powered off.
Blinking: The system is working properly.
On: The fan is working properly.
Off: The fan fails or is disconnected.
On: Indicates the system alarm.
Off: Indicates the system has no alarm.
Huawei Industrial Base Bantian Longgang Shenzhen
12
HUAWEI TECHNOLOGIES CO., LTD.
People's Republic of China
518129
www.huawei.com
Advertisement
Table of Contents
