Setup Menu Settings; Setup Menu Organization; System Setup - Sony DFS-700 Operating Instructions Manual

Setup Menu Settings

Setup Menu Organization

Menu name
SYS
A "P" appears here when P 1/8
preread editing is on.
Page
System Setup (page 1/8)
Setting
Button
a)
F1 SCREEN
F2 PRE RD
F3 PORTS
F4 TALLY
CpnIN
F5
(Only appears when
optional BKDF-702/702P
is installed.)
a)The SCREEN setting cannot be saved in memory.
The setup menu is divided into eight pages, and each appears as shown in
the following example.
Example display:
SCREEN PRE RD PORTS
4:3 OFF PVE500
Values
Meaning
Set screen aspect ratio.
Toggle preread editing on/off.
When this is on, a "P" appears at the
beginning of line two of the menu
display.
Select type of editor connected to
EDITOR connector.
(See table below.)
Toggle rear panel tally output signal on/
off.
Assignment of IN1-4 r: assign 1
numbers to rear panel to 4.
COMPONENT
IN5-8 r: assign 5
5 8
connectors / to /
1 4 to 8.
F3(PORTS) setting and control
Values Valid control for each connector
EDITOR connector
PVE-500 DVS control
BVE-600 –
GPI –
TALLY CpnIN
OFF IN 4
Values
(First value is factory default.)
4:3/16:9
OFF/ON
PVE-500/BVE-600/GPI
(Select "PVE500" when a BVE-2000 is
connected.)
OFF/ON
1-4/5-8
To confirm displayed assignment, press
F3(OK); to cancel press F5(CANCEL).
GPI/T 1 GPI/T 2
– DSK transitions
Auto transitions
Auto transitions DSK transitions
Chapter 6 System Connections and Settings
Settings
To submenu
6-7