Siemens SINUMERIK 840D sl Function Manual page 277

Tool parameter
Geometry - tool radius compensation
$TC_DP6
$TC_DP7
$TC_DP8
$TC_DP9
$TC_DP10
$TC_DP11
Wear - tool length compensation
$TC_DP12
$TC_DP13
$TC_DP14
Wear - tool radius compensation
$TC_DP15
$TC_DP16
$TC_DP17
$TC_DP18
$TC_DP19
$TC_DP20
Base dimension/adapter dimension - tool length compensation
$TC_DP21
$TC_DP22
$TC_DP23
Technology
$TC_DP24
$TC_DP25
Note
The cutting edge data for D1 and D2 of a selected grinding tool can be chained, i.e. if a
parameter in D1 or D2 is modified, then the same parameter in D1 or D2 is automatically
overwritten with the new value (see $TC_TPG2 (Page 280)).
Tools
Function Manual, 06/2019, A5E47435126B AA
W4: Grinding-specific tool offset and tool monitoring
Meaning
Radius 1
Length 1
Length 2
Length 3
Radius 1
Basic length 1
Basic length 2
Basic length 3
Undercut angle
4.1 Grinding-specific tool data
Comment
For turning tools only
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
277