Querying The Interrupt Information Reported By A Hardware Module (Fm_Show) - Huawei IN200 User Manual

Huawei IN200 NIC
User Guide
Format
hinicadm pdm -i <devicename> -m <module name> -s <start index> -e <end index>
Parameters
Parameter
devicename
module name
start index
end index
Usage Instruction
None
Example
# Query the host resource information in a specified range.
[root@localhost ~]# hinicadm pdm -i hinic0 -m host -s 0 -e 3
****** HOST RESOURCE ******
tbl_idx
host0
host1
host2
host3
6.1.4.36 Querying the Interrupt Information Reported by a Hardware Module
(fm_show)
Function
The fm_show command is used to query the interrupt information reported by a hardware
module.
Format
hinicadm fm_show -i <devicename>
Issue 06 (2019-07-27)
Description
Indicates the name of the
IN200 whose FEC mode is to
be queried in the system.
Indicates the resource type.
Indicates the start index of a
resource type. Each resource
type has a unique index range.
Indicates the end index of a
resource type. Each resource
type has a unique index range,
which must be greater than or
equal to the start index.
nm_th mqm_th
10292 10036
10292 10036
10292 10036
10292 10036
Copyright © Huawei Technologies Co., Ltd.
Value
Example: hinic0 and hinic1
all, glb, pg, tx, rx, yzone, rzone, nport,
ncos, host, hsrv, hport, hpri, hep, or
hque
-
-
gap_th nm_cnt
150 0
150 0
150 0
150 0
6 Management Tools
96