Querying The Queue Information Of A Specified Device (Nic_Queue) - Huawei IN200 User Manual

Huawei IN200 NIC
User Guide
[root@localhost tool]# hinicadm autoneg -i hinic0 -p 1
Port1 auto-negotiation mode: ieee

6.1.4.16 Querying the Queue Information of a Specified Device (nic_queue)

Function
The nic_queue command is used to query the queue information of a specified network
device.
Format
hinicadm nic_queue -i <ethdevicename> -d <direction> -t <type> -q <queueid> [-w
<wqeid>]
Parameters
Parameter
ethdevicename
direction
type
queueid
wqeid
Usage Instruction
None
Example
# Query the queue information of eth0 on the IN200.
[root@localhost tool]# hinicadm nic_queue -i eth0 -d 1 -t 0 -q 0
Receive queue0 information:
Issue 06 (2019-07-27)
Description
Indicates the name of the
network device to be queried in
the system.
Indicates the direction of the
queue to be queried.
Indicates the information type
to be queried.
Indicates the ID of the queue to
be queried.
Indicates the ID of the WQE to
be queried.
Copyright © Huawei Technologies Co., Ltd.
6 Management Tools
Value
Example: eth0 and eth1
l 0: sending direction (tx)
l 1: receiving direction
(rx)
l 0: queue information
l 1: work queue entry
(WQE) information.
l 2: CI table information
(only tx)
l 3: completion queue
entry (CQE)
information (only rx)
-
-
75