Key Features - Toshiba OIS PLUS Series Manual

KEY FEATURES

Connection to ASDs:
The OIS PLUS can receive multiple types of inputs (digital, analog, thermocouple, RTD, etc) and use these
to control ASDs (adjustable speed drives). The OIS PLUS has the ASD parameters immediately available in
the setup software, no special programming is necessary.
A.
OIS55 PLUS
Send to ASD
Run/Stop, Jog
Accel/Decel Time,
Forward/Reverse,
Operating Freq.,etc.
Ethernet connection is also available (requires Ethernet switch for more than 1 ASD)
Setup ASDs:
Simple setup software allows each type of equipment to be defined, mapped, and tagged.
Navigate with Project Navigator
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Fault Status, Power Output,
Voltage Output, Current Output
Frequency Output, etc.
RS485, Toshiba ASCII Protocol or Modbus
1
Select Device
for each Com
Port & Node
Assign Tags
to each
4
Device
Page 7 of 24
Send to OIS Plus
2
Select Communication Parameters for Device
Define
3
Device
Tags
ASD 1
ASD 2