Data Logging - Toshiba OIS PLUS Series Manual

Data Logging:

In many testing procedures, production runs, or process steps, it is as import to log system parameters as it
is to control the sequences. The larger OIS PLUS have the capability to log user defined data. This data can
be exported to a *.csv file and saved on a USB memory drive. From the memory drive, the data can be
imported into MS Excel, MS Access, Lotus 1-2-3, etc. for further analysis. Logging can be specified by group
and by when to start: Logging can start and stop on command.
Power-up
OIS Plus
USB Memory Drive
Logged data can be very useful for many different purposes:
♦
QC verification that all parameters are within acceptable range.
♦
Confirmation that critical parameters meet regulatory agency compliance specifications.
♦ Substantiation of system status for use in incident analysis.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Time/Date Key Task
Date
10/08/16
10/08/17
10/08/18
10/08/19
10/08/20
10/08/21
10/08/22
Data logging can be initiated from either the touchscreen or the
ladder program. File transfer to the USB memory drive can be
done without stopping the OIS Plus. Data transfer from the OIS
PLUS can either overwrite an existing file on the USB memory
drive or create a new file.
Page 9 of 24
Event Occurrence
*.csv File
Time Tag 1 Tag 2 Tag 3 Tag 4 Tag 5
10:15 2 50
10:15 3 45
13:30 5 40
13:30 5 40
15:00 5 45
15:00 2 50
15:00 3 50
100 500 0
100 600 0
100 700 0
100 700 0
100 700 0
100 600 0
100 500 0