SUN2000-(3KTL-12KTL)-M0
User Manual
Figure 5-12 Removing a DC connector
5.5 (Optional) Installing the Smart Dongle
Procedure
Step 1 Install the Smart Dongle.
Figure 5-13 Installing the Smart Dongle.
----End
Issue 01 (2018-12-30)
If the 4G module you purchase is configured with a SIM card, skip this step.
If it is not configured with a SIM card, prepare a standard one (dimensions: 25 mm x 15 mm,
capacity ≥ 64 KB.
When installing a SIM card, you can determine the SIM card installation direction based on the silk
screen and arrow mark on the slot.
When being pressed into place, the SIM card will be locked, which means that the card is installed
correctly.
To remove the SIM card, push it inwards. Then the SIM card springs out automatically.
When reinstalling the 4G Smart Dongle, ensure that the buckle springs back in place.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
39