About This Manual - GE Datex-Ohmeda S/5 Series Technical Reference Manual

About this manual

Intended audience
This Technical reference manual is meant for service representatives and technical personnel
who install, configure, maintain, administer, troubleshoot or repair Datex-Ohmeda S/5 Compact
Anesthesia Monitors running the software license L-CANE06 or L-CANE06A and S/5 Compact
Critical Care Monitors running the software license L-CICU06 or L-CICU06A.
Notes to the reader
As the monitor setup may vary, some functions described may not be available in the monitor
you are using.
•
The order code for the entire printed manual is M1065281. The manual includes
Technical Reference Manual Slots and every slot has an individual document number.
•
Part I gives the reader an overview of the monitor. It contains the information needed to
install, interface and troubleshoot the monitors. Instructions for functional check and
planned maintenance are also included. Read the manual through and make sure that
you understand the procedures described before the installation of the monitor. To avoid
risks concerning safety or health, strictly observe the warning indications. If you need
any assistance concerning the installation, please do not hesitate to contact your
authorized distributor.
•
Part II contains detailed descriptions of each component of the S/5 CAM, CCCM Monitor,
such as frame unit, parameter modules Remote Controller and Device Interfacing
Solution. Service check for each product, service menus and all the spare parts
information for the Monitor is included.
For information of parameter modules, Remote Controller and Device Interfacing Solution refer
to the "S/5 E-Modules, Technical Reference Manual". Service check for each of these products
is included in these slots.
The manufacturer reserves the right to change product specifications without prior notice.
Although the information in this manual is believed to be accurate and reliable, the
manufacturer assumes no responsibility for its use.
Installation and service are allowed by authorized service personnel only.
GE Healthcare Finland Oy (GE) assumes no responsibility for the use or reliability of its software
in equipment that is not furnished by GE.
Related documentation
S/5 Modules
S/5 E-Modules, Technical Reference Manual
S/5 M-Modules, Technical Reference Manual
S/5 Compact Anesthesia Monitor
For instructions for daily use including cleaning and daily maintenance, clinical aspects and
basic methods of measurement see:
S/5 Compact Anesthesia Monitor, User's Guide
S/5 Compact Anesthesia Monitor, User's Reference Manual
Document no. M1144951-004
1