Advertisement
EXTERNAL CONTROLS AND CONNECTORS
1
Lens Mount
The camera has a standard CS lens mount but can use a C-mount lens when a C/CS-mount adapter is installed
between the lens and camera.
! Back Focus Lock Screw
2
Loosen to adjust the back focus to match the lens attached to the CS mount. Refer to the section on Back Focus
Adjustment in this manual.
" Camera Mounts
"
3
T op or bottom mounting. Maximum thread length is 3/16-inch. Attach the camera mount adapter to extend
thread depth to a standard 1/4-inch.
"
# Video Output Connector
#
4
This coaxial connector (BNC type) outputs the video signals.
#
"
$ Lens Connector
$
5
Four-pin DC-control connector for auto iris lens. Refer to the section on Lens in this manual for pin connections.
% Setup Switch
"
$
#
%
6
This is the switch to display and operate the menu when OSD function is used.
it is used for the selection of ON or OFF . Refer to the section on Setting Operation in this manual.
"
& Power Input T erminal
#
$
% &
7
Three-pin terminal strip, push-in type; 24 V AC/12 VDC for NTSC/P AL models.
TOP/FROMT VIEW
Fig.1
BACK VIEW
En-6
Advertisement
