Launch The Appliance Configuration Manager; Additional Resources - Dell DP4400 Hardware Installation Manual

Hardware Installation Guide

Launch the Appliance Configuration Manager

Additional resources

Document references for IDPA
Integrated Data Protection Appliance DP4400 2.4 Hardware Installation Guide
16
remove failed: No such file or directory"
"warning: file /usr/local/dataprotection/customscripts/
Config.properties: remove failed: No such file or
directory"
11. Verify that the pre-installation patch installation completed successfully by
typing the following command:
rpm -qa | grep dataprotection
Ensure that the DataProtection-ACM version is
571095.x86_64 or later.
12. Delete the Idpa_pre_update_N.N.N.nnnnnn.tar.gz file, and then delete
the /tmp/patch/Idpa_pre_update_N.N.N.nnnnnn directory.
13. Edit the /usr/local/dataprotection/server/version/
applianceVersion.xml file and modify value in the <build> tag to the latest
build for the ACM and IDPA nodes.
The following example highlights the changes that you must make to the
<build> tag. In this example, the build number is 571095.
<applianceVersion>
<id>IDPA</id>
<version>
<major>2</major>
<subMajor>0</subMajor>
<minor>0</minor>
<build>571095</build>
</version>
<components>
<component>
<id>ACM</id>
<version>
</version>
</component>
Launch the Appliance Configuration Manager to complete the initial network
configuration. The Appliance Configuration Manager (ACM) walks you through the
steps to configure network settings, license the IDPA software, and configure the
IDPA.
To continue configuring the IDPA with the ACM, refer to the Integrated Data
Protection Appliance DP4400 Getting Started Guide . This document explains common
user tasks such as how to create backup policies and restore from backup.
The IDPA documentation set includes the following publications:
<major>1</major>
<subMajor>0</subMajor>
<minor>0</minor>
<build>571095</build>
dataprotection-2.0.0-