Do not allow infants and children to play with packaging material. Do not disassemble, repair or modify this appliance. ● Contact Panasonic Service Centre for inspection or repair. ● Do not damage the power cord or power plug. pulling, hanging /...
Page 3
The appliance power fails. There is an unpleasant smell. Contact Panasonic Service Centre for inspection or repair. Make sure the voltage indicated on the label of the appliance is the same as your local supply. ●...
Safety Precautions Please make sure to follow these instructions. CAUTION Do not blend or place over 60 °C ingredients into the blender jug. ● Do not put any liquids or wet ingredients into the mill container. ● ● jug while the appliance is operating. ●...
Parts Names and Instructions Blender Dry mill Accessory Mill container Scraper opening. Do not use with Mill gasket lid off. Motor housing Pulse Power plug Power cord Before Use , and then assemble them securely. (P. EN6 “How to Use” and P. EN7 “Cleaning and Care” ) Blender Dry mill The blender is intended for...
How to Use Blender Dry mill To disassemble To assemble Place the ingredients into blender jug, and then close the lid. Turn anticlockwise Turn clockwise Make sure the mill gasket is not damaged Attach blender jug to the motor housing. Align the on the motor housing with the...
Cleaning and Care Blender jug prewash Other parts Blender jug and mill blade Wash each part in cold or lukewarm water with a soft sponge. Rinse and dry thoroughly. Motor housing Wash each part in cold or lukewarm water with a soft sponge. Rinse and dry thoroughly.
Foreign matters are attached to the mill gasket. leaking. ➝ Remove them. The mill gasket is damaged. ➝ Contact Panasonic Service Center to replace it. The liquid amount is not enough. ➝ Too much ice cubes. The blade is idling.