Manual Station Tuning - Silvercrest SSR 10 A2 User Manual

 Press the "MODE" button (3). The "FM" symbol (11) flashes on
the display.
 Press the "-" button (2) or "+" button (4) for approx. 2 seconds
to start the manual station scan downwards or upwards. As
soon as the device finds a station with a strong signal, the scan
stops and the station is played.
 If you want to switch to another station, press the "-" button (2)
or "+" button (4) again to restart the manual station scan
downwards or upwards. The device searches for the next
station with a strong signal.
 To exit scan mode, press the "MODE" button (3) again.

Manual station tuning

As an alternative to the automatic or manual station scan, you
can also tune in stations manually. This enables you to find
stations with weaker signals also. Proceed as follows:
 Switch on the scan radio with the "On/Standby" button (6).
 Press the "MODE" button (3). The "FM" symbol (11) flashes on
the display.
 Briefly press the "-" button (2) or "+" button (4).
 You thus move 0.1MHz downwards or upwards in the
frequency band each time you press the "-" button (2) or "+"
button (4) respectively.
 Proceed in this manner until you find the desired station.
 Press the "MODE" button (3) to return to volume mode. The
"FM" symbol (11) is displayed permanently on the display.
SilverCrest SSR 10 A2
English - 17