Philips PM 5326 Instruction Manual page 20

Legend Position
Function
SWEEP
RF CENTER
SWEEP
RF WIDTH
SWEEP
LF FREQUENCY
PHASE
SWEEP
LF AMPLITUDE
SWEEP OUT
3.1.4.
Frequency markers
MARKER
OFFION
MARKER
MARKER AMPL 605
PULL FOR FIXED MARKERS 605
IN-Y-OUT 813,814
3.1.5. Counter
COUNTER EXT
COUNTER IN
3.1.6. 1 kHz sine-wave generator
MODISWEEP OUT
3.1.7.
Triangle generator
SWEEP OUT
LF AMPLITUDE
3.1.8. Power supply
POWER
ON o @OFF
dual-knob (coarse, fine) for continuous adjustment
of the centre frequency of the wobbling range
knob for continuous adjustment of the wobbling width
knob for continuous frequency adjustment on trian-
gular wobbling or phase adjustment on wobbling at line
frequency
knob for continuous adjustment of the wobbling voltage
BNC output socket for the wobble signal
pushbutton for operation with frequency markers
LED for operation with markers
knob for continuous adjustment of marker amplitude
pull switch for adding fixed frequencies
2 BNC sockets:
- output socket for marker signal
-
mixing device for superposition of test object output
signal with marker signal
801
.I commutator for frequency counter mode
81 2 BNC counter input socket
81 5 BNC output socket for 1 kHz sine wave
8 1 5 BNC output socket for triangle signal of sweep generator
602 knob for continuous amplitude adjustment
851 mains switch:
white dot for ON position