Removing and Replacing Parts : Dell Inspiron 2100
NOTICE:
Disconnect the computer and any attached devices from electrical outlets, and
remove any installed batteries.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by touching
an unpainted metal surface on the computer.
NOTICE:
Read
following procedure.
1. Remove the
keyboard
2. Remove the
display
3. Remove the
keyboard
4. Remove the
palm rest
5. Remove the
system board
NOTICE:
The tabs on the release button are plastic. Care should be taken when
squeezing the tabs to avoid breaking them.
6. Using needle-nose pliers, gently squeeze the two tabs on the back of the release button
together and grasp the top of the battery release latch and gently pull up to free it from
file:///F|/Service%20Manuals/Dell/Inspiron/2100/remove.htm (42 of 44) [2/28/2004 6:49:35 AM]
"Preparing to Work Inside Your
bezel.
assembly.
assembly.
assembly.
assembly.
Computer" before performing the