Daily Operation Of Oil Mist Remover; When Setting; When Stopped - Hitachi NEXT Series Instruction Manual

3. OPERATING PROCEDURE [Daily Operation of Oil Mist Remover]

3.6 Daily Operation of Oil Mist Remover

3.6.1 When Setting

φ8
Make sure that the pressure
gauge reads as follows:
Make sure that the
vacuum indicator does not
show a red mark.
34
Pressure Gauge
51 to 58 psi
Make sure that the
condensate is not
collected in the
filter bowl.
If the condensate is
collected, push up
the cock to drain
the condensate.
Condensate Drain Cock

3.6.2 When Stopped

Make sure that the vacuum indicator shows a red mark.
(see the left drawing)