Figure 53 – I/O Parameter window 9 (process alarm limit)
Process alarm hysteresis setting (addresses 43–46)
1.
The default range for this parameter value is as shown below. If the set value is
outside the range, setting error will occur with the setting value of '0' saved inside
the module.
2.
If process alarm function is used, the alarm output is set within the hysteresis value,
though the alarming condition is cancelled.
R200
Resistance Temperature Detector 2MLF-RD4A User's Guide
September 2010
5. Internal Memory Configuration and Functions
Figure 54 – Process alarm hysteresis
Honeywell
5.3. Operation parameters setting area
101