RTD module hardware error
When hardware error occurs in the RTD module, contact the nearest agency or service
center of Honeywell Co. Ltd.
It is necessary to do a status check before contacting the service agency. The status check
is done as described below:
RTD module status check through SoftMaster system monitoring
SoftMaster system monitoring function can be used to gather following data:
Module type
•
Module information
•
O/S version
•
Status of the RTD module.
•
Execution sequence
Two routes available for the execution are:
1.
On the module screen, click Monitor > System Monitoring and right-click to
display Module Information.
2. On the module screen, click Monitor > System Monitoring > and double-click the
module screen.
Module information
Module Info: shows the information of the module presently installed.
1.
2. OS version: shows the O/S version information of RTD module.
3. OS date: shows the O/S prepared date of RTD module.
4. Module status: shows the present error code.
R200
Resistance Temperature Detector 2MLF-RD4A User's Guide
September 2010
7.3. Troubleshooting procedures
Honeywell
7. Troubleshooting
135