Advertisement
Quick Links
Retrostat Kits for POWERS™ CONTROLS
TH 180, TH 182 D/N or H/C Thermostats
Product Description
The Retrostat kits replace a discontinued Powers Controls
TH 180 or TH182 day/night or a heating/cooling pneumatic
thermostat with a TH 192 direct or reverse acting, two
pipe, dual temperature pneumatic device.
Contents
Part
Retrostat Cover Kit
Thermostat *
Adapter frame
Bag assembly with installation hardware
Optional 1/2-inch Large, Exposed Set
Point Knob
*
Includes thermostat installation instructions.
Expected Installation Time
1 hour
Required Tools
·
Calibration and cover screw wrench (192-632) or
1/16" Allen wrench and 1/8" open-end wrench
·
Medium flat-blade screwdriver
·
Small level
·
Accurate thermometer
·
Needle nose pliers
Item Number 129-179+3, Rev. EA
Product Numbers
Type
Day/
Night
Heat/
Cool
Quantity
NOTE:
1
For Retrostat Kits with optional 1/2-inch large, exposed
1
setpoint adjustment knob, order standard kit with "K"
1
suffix.
Prerequisites
1
1
·
·
·
·
·
Installation Instructions
Document No. 129-179
Thermostat
Replaces
Action
Scale
°F
Direct
180-410
180-413
180-910
180-913
182-500
182-501
°C
182-627
182-630
182-632
°F
Reverse
180-937
182-503
°F
Direct/
180-420
Reverse
180-423
180-920
180-923
182-506
182-507
°C
182-633
182-634
Review all of these instructions before you begin
installation.
Check job drawings for any site-specific
information.
Verify the existing thermostat installation has its
supply and return air lines connected properly.
Obtain the installation instructions provided with
the thermostat in this Retrostat Kit. The document
provides instructions for calibrating the thermostat.
Ensure that a supply of wall anchors and plastic
ties are available.
October 4, 2017
Retrostat Kit
(See Notes
1 and 2)
192-3044
192-3144
192-3054
192-3084
192-3184
Page 1 of 4
Advertisement
Related Manuals for Siemens TH 180
Summary of Contents for Siemens TH 180
-
Page 1: Product Description
Product Description Product Numbers The Retrostat kits replace a discontinued Powers Controls Thermostat Replaces Retrostat Kit TH 180 or TH182 day/night or a heating/cooling pneumatic (See Notes Type Action Scale thermostat with a TH 192 direct or reverse acting, two 1 and 2) pipe, dual temperature pneumatic device. - Page 2 Technical Bulletin Document Number into the terminal adapter O-rings on the wall plate. TB 214 TH 192 Adapter Kits 155-231 Configure the cover per installation instructions provided and mount the cover over the thermostat. Page 2 of 4 Siemens Industry, Inc.
- Page 3 Document No. 129-179 Installation Instructions October 4, 2017 Figure 1. Typical Thermostat Installation. Figure 3. Terminal Head Removed with 3/16-inch O.D. Copper Tubing. Figure 2. Terminal Head Removed with 1/8-inch O.D. Copper Tubing. Page 3 of 4 Siemens Industry, Inc.
- Page 4 Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as design improvements are introduced. Retroline is a registered trademark of Siemens Industry, Inc. POWERS CONTROLS is a trademark of Siemens Industry, Inc.