Using The Brightness Knob; Outputting A Still Image - Sony MCC-1000MD Instructions For Use Manual

To set the AE level using the [Exposure] setting
in the [Picture] menu
In [Picture] menu's [Exposure] > [Mode], select
[Auto], and then set [Auto Exposure Level].
Press the B/b buttons to set the value on the slider
that appears.
The gray circle on the slider indicates the setting
value before the change, and the blue circle
indicates the current setting value.
Tip
When a slider is displayed, holding down the B/b
buttons increases the incremental speed at which
the value changes, allowing you to set your target
value faster.

Using the BRIGHTNESS knob

By turning the BRIGHTNESS knob with the
AE function off, you can adjust the brightness
with a combination of gain and shutter speed
settings. Turning the knob clockwise will
brighten the image (higher gain or a slower
shutter speed), and turning it counterclockwise
will darken the image (lower gain or a faster
shutter speed).
You can reset the AE level to factory default
settings by holding down the
knob for one second or longer.
To output a still image
Press the
panel to output camera images as a still image.
When still image output is enabled, the
FREEZE button lights.
To return to normal picture
Press the
Tips
BRIGHTNESS • Adjustments to image quality settings may be
• During still image output, effects will not be
• Color bar output will be disabled when you
35

Outputting a Still Image

FREEZE button on the CCU front
FREEZE button
FREEZE button again.
made in the [Picture] menu during still image
output, however, these changes will not be
reflected in the still images. Once you switch
back to normal picture, the image quality
changes can be checked.
reflected when switching Picture Profiles. Once
you switch back to normal picture, Picture
Profile changes can be checked.
switch to still image output.