Beko METPOINT OCV Instructions For Installation And Operation Manual page 2

Dear customer,
Thank you for deciding in favour of the METPOINT
Please read these installation- and operating instructions carefully before mounting and starting up the
®
METPOINT OCV measuring device, and follow our directions. Perfect functioning of the METPOINT
OCV, and thus exact measurement and monitoring of the residual oil content in compressed air, can
only be guaranteed when the provisions and notes stipulated here are strictly adhered to.
These instructions for installation and operation are a supplement to
the installation and operating instructions METPOINT
installation and operation of the measurement accessories to be applied
in systems with an operating pressure of 40 bar.
The installation
components are not substituted by these, and they shall still be applied
in their entirety. They should always be available during the operation of
®
METPOINT OCV in systems with an operating pressure of 40 bar.
2
and operating
Measurement accessories METPOINT® OCV 40 bar
®
OCV measuring device with sampling probe.
instructions of
®
OCV for the
the integrated
®