HP 9000 300 Series Installation Reference page 23

High-resolution Color
This section covers installing a high-resolution color monitor.
Find and unpack the video board.
If you ordered an unbundled system or are upgrading your system, the video board may
have come separately. Locate the video board carton. It will have the number 98547A
stamped on it.
Install the video board in the computer.
The video board must be installed in the bottom slot in the computer. If a board is
already located there. it must be removed and positioned elsewhere.
Find the video display monitor carton.
The monitor furnished with your computer is an HP 98751 or an HP 98752A 19-inch
high-resolution Color Video Monitor. Find the carton containing your monitor. It will
have HP 98751 or HP 98752 printed on it. Go ahead and unpack the monitor and place
it on a convenient surface at your work area.
I
CAUTION
I
Turn your computer OFF before installing the monitor.
I
CAUTION
I
Do not obstruct the air vents at the top and sides of the monitor.
Check the voltage select setting.
Your monitor has a voltage select switch. Make sure that the monitor is set to the same
voltage range as the computer.
Installing Your System
15