Outer Case Removal; Appliance Connection - Bosch Worcester Greenstar Ri ErP + Series Installation And Maintenance Instructions Manual

5.4

OUTER CASE REMOVAL

1. Undo the two captive screws securing appliance casing at the bottom
of the appliance.
2. Undo the two screws securing appliance casing at the top of the
appliance.
3. Pull case upwards.
4. Remove the transit packing piece from appliance and discard.
With the outer case removed the appliance is suitable for a one man lift
(<25kg).
1.
3.
Fig. 27 Case removal
6 720 821 670 (2018/06)
2.
4.
6720804514-02.1Wo
5.5

APPLIANCE CONNECTION

CAUTION:
▶ ISOLATE THE MAINS GAS SUPPLY BEFORE
STARTING ANY WORK AND OBSERVE ALL RELEVANT
SAFETY PRECAUTIONS.
WARNING:
▶ Caps fitted to pipes must be removed before hanging
the appliance
GAS AND WATER CONNECTIONS:
▶ Remove wall mounting template and secure the wall mounting frame
to the wall with the appropriate fittings for the appliance weight and
wall type.
▶ If there is greater than 600mm clearance below the appliance it is
possible to fit the flow and return pipes, supplied, with the appliance
installed on the wall.
▶ If clearance is less than 600mm below the appliance it may be
necessary to fit the flow and return pipes before hanging the
appliance.
The copper pipes supplied with the appliance are not to
used for the gas supply.
These copper pipes are for water only.
NOTICE:
▶ Lift the appliance using the handling holes at either
side of the frame.
Do not lift the appliance by the air gas manifold or
control box.
System pipes may be run vertically up behind the appliance or below it.
NOTICE:
▶ If pipes require reducing in length this is best done
before they are fitted to the appliance.
INSTALLATION
33