Infocenter Advisories - Toro Groundsmaster 5900 Software Manual

InfoCenter Advisories

Operator advisories automatically display on the InfoCenter screen when a machine function requires additional
action. For example, if you attempt to start the engine while pressing the traction pedal, an advisory displays,
indicating that the traction pedal must be in the N
For each advisory that occurs, there is a condition (e.g., start denied, PTO denied, cruise control denied),
an advisory code (number), a qualifier (the cause of the advisory displayed), and a display text (what the
advisory displays as text on the screen) as shown in
1. Display text
2. Code
Note:
Advisories do not log into the fault log.
Note:
You can clear an advisory from the display screen by pressing any of the InfoCenter keys.
Refer to the following table for all the InfoCenter advisories:
Condition
Start Denied
Start Denied
Start Denied
Start Denied
Start Denied
Start Denied
PTO Denied
PTO Denied
PTO Denied
PTO Denied
PTO Denied
EUTRAL
g031999
Figure 21
Code
4
5
6
7
8
9
102
106
107
108
109
position.
Figure 21.
3. Press any key on the InfoCenter to clear the text from the
display screen.
Qualifier
Teach engaged
PTO engaged
Not in N
EUTRAL
Neither in seat nor parking
brake applied
Deck switch engaged
Recycle power
In high range (only cut in low)
Out of seat
No decks floating (hit a down
key)
Engine hot
Loss of CAN bus (service
required)
10
1
2
3
Display Text
N/A
To start, disengage PTO
To start, move traction pedal to
N
EUTRAL
To start, must be seated or set
parking brake
To start, disengage deck switch
To start, turn key switch off,
then on
To engage PTO, must be in low
range
To engage PTO, operator must
be seated
To engage PTO, lower decks
To engage PTO, let engine cool
To engage PTO, requires
service
g031999