Advanced Settings; Base Settings; Change Pin; Base Version - Motorola AX Series User Manual

11.

Advanced settings

11.1

Base settings

11.1.1

Change PIN

Some functions are protected by a 4 digit PIN code which must be entered if the
settings are changed. The default depends on the base. The PIN can be changed to
a preferred number.
When entering a PIN, the digits are shown as ****
1. Press Menu, scroll
Base Settings is highlighted. Press Select.
2.
Change PIN is highlighted. Press Select.
3.
4. Enter the old PIN and press OK.
5. Enter the new PIN and press OK.
6. Re-enter the new PIN and press Save.
e
7. Press to return to standby.
Note
The default PIN is 0000.
11.1.2

Base version

1. Press Menu, scroll
2. Base Settings is highlighted. Press Select.
d
Base Version
3. Scroll to
4. The Firmware and Hardware Versions, Serial Number and MAC address will be
displayed.
e
5. Press to return to standby.
11.1.3

Restore base default settings

1. Press Menu, scroll
2. Base Settings is highlighted. Press Select.
d
3. Scroll to Base Reset
Confirm?
4. is displayed. Press
Note
If you reset the base settings all the base settings will return to their default
settings, e.g. intrusion call, flash mode, dial mode and area code settings.
Resetting the base to default settings will also impact the following:
• Date & time.
• Contacts list will be cleared.
• Calls List will be cleared.
Advanced settings
d
to Advanced Settings
d
to Advanced Settings
and press Select.
d
to Advanced Settings
and press Select.
Yes
to confirm or
and press Select.
and press Select.
and press Select.
No
to cancel.
41