Installing The Base - Motorola AX Series User Manual

1.1

Installing the base

Plug the Ethernet cable
1
into the socket on the
rear of the base and
plug the other end into
any spare Ethernet port
on the router.
Note
The power adapter with the smaller jack is for the base unit and the power adapter
with the bigger jack is for the charger unit.
The base station must be connected to the AC power outlet and the Ethernet cable
must be plugged into the router at all times. Use only the AC power adaptor and
telephone line cord supplied with the product.
Getting started
The telephone line cord will be pre-installed into the
3
socket on the rear of the base.
It is recommended to complete set-up (refer to
Section 3.1) before you plug the other end of the
telephone line cord into the telephone line wall jack.
Plug the AC power jack into
2
the socket on the rear of the
base and the AC power
adaptor into the power outlet.
9