Features - Siemens 1FK7 02 Series Manual

3.2

Features

Types of construction
(EN 60034-7)
Degree of protection
(EN 60034-5)
Cooling
(EN 60034-6)
A-grade sound intensity level
(EN 60034-9)
for speed range up to 3,000 rpm
1FK7 02., 1FK7 03., 1FK7 04.
1FK7 06.
1FK7 08., 1FK7 10.
Thermal motor protection
(EN 60034-11)
Shaft end
(DIN 748-3; IEC 60072-1)
true running, coaxiality, axial run-out deviation Tolerance N
(DIN 42955; IEC 60072-1)
Vibration severity
(EN 60034-14)
Bearing
Service life of bearing
Winding insulation
(EN 60034-1)
Ambient temperatures
Installation altitude
(EN 60034-1)
Magnetic material
Electrical connections
Encoder system
Additional technical parameters, dimensional sheets according to project planning guide
"Three-Phase Servomotors", order no. 6SN1197-0AC20-0AP.
Options/expansions
Low inertia series
Type of protection
(EN 60034-5)
12
ENGLISH
IM B5 (IM V1, IM V3)
IP64
Self-cooling
approx. 55 dB(A)
approx. 65 dB(A)
approx. 70 dB(A)
Temperature sensor KTY84
in the stator winding
cylindrical; without keyway,
Tolerance range k6
Grade N
Rolling contact bearing with permanent
grease lubrication (lifetime lubrication)
fixed bearing on non-drive end
20000 h (guideline)
Temperature class F
-15 °C to +40 °C (5 °F to 104 °F)
otherwise the rated data are reduced
to 50 °C conversion factor 0,92
to 60 °C conversion factor 0,82
up to 1000 m a.s.l,
2000 m conversion factor 0,94
2500 m conversion factor 0,9
Rare-earth material
Revolving plug for output and
encoder signals
fitted encoder
- speed recording
- recording the rotor position
- indirect positional recording
HD (High Dynamic)
IP 65; additional drive end flange IP67
610.40 700.21 Siemens AG