Table of Contents
Advertisement
with European regulations.
To disable or enable "Energy Saving", proceed as follows:
1. Press
(B2) to enter the menu;
2. Press
(B10) or
pears on the display (B);
3. Press
to enable -
ergy saving.
ergy saving.
4. Press
to go back to the homepage.
The corresponding symbol appears on the display alongside the
time to indicate that the function has been enabled.
Co ee temperature
To modify the temperature of the water used to make the co ee,
proceed as follows:
1. Press
(B2) to enter the menu;
2. Press
(B10) or
TURE appears on the display (B) together with the current
selection (LOW, MEDIUM, HIGH or MAX);
3. Press
to select the required temperature;
4. Press
to go back to the homepage.
A di erent temperature can be set for each pro le (see section
"Memorising your personal pro le").
Water hardness
For instructions on setting water hardness, see section "Setting
water hardness".
Selecting the language
To modify the language of the display (B), proceed as follows:
1. Press
(B2) to enter the menu;
2. Press
(B10) or
pears on the display;
3. Press
: press
corresponding to the required language;
4. Press
twice to go back to the homepage.
Beep
This enables or disables the beep emitted by the machine each
time an icon is pressed or an accessory is inserted/removed. To
disable or enable the beep, proceed as follows:
1. Press
(B2) to enter the menu;
2. Press
(B10) or
the display (B);
3. Press
to enable -
the beep;
4. Press
to go back to the homepage.
(B8) until
ENERGY SAVING ap-
or disable -
(B8) until
COFFEE TEMPERA-
(B8) until
SET LANGUAGE ap-
or
to display and select the ag
(B8) until
BEEP appears on
or disable -
Cup light
This function enables or disables the cup lights (A18). The lights
come on each time co ee beverages or hot milk is delivered and
during each rinse cycle.
To disable or enable this function, proceed as follows:
1. Press
(B2) to enter the menu;
en-
2. Press
(B10) or
pears on the display (B);
3. Press
to enable-
cup lighting;
4. Press
The interior lighting (A6) comes on when the appliance is turned
on.
Demo mode
By enabling this mode, the main functions of the machine are
shown on the display:
1. Press
(B2) to enter the menu;
2. Press
(B10) or
DEMO MODE;
3. Press
to start the demo;
4. To exit from the DEMO MODE, rst turn the appliance o by
pressing the button
to go back to the homepage.
Emptying the circuit
To avoid the water in the circuit freezing if the appliance is to be
left idle for a long period of time, or before taking it to customer
services, we recommend emptying the water circuit.
Proceed as follows:
1. Press
(B2) to enter the menu;
2. Press
(B10) or
EMPTYING appears on the display (B);
3. Press
;
4. EMPTY GROUNDS CONTAINER AND DRIP TRAY : extract and
empty the grounds container (A10) and drip tray (A14).
Press
5. INSERT GROUNDS CONTAINER AND DRIP TRAY : insert the
drip tray complete with grounds container;
6. PLACE 0.5l CONTAINER UNDER SPOUTS, PRESS OK TO START :
position a container under the co ee spouts (A13) and hot
water spout (C4). Press
WARNING
Do not leave the appliance unattended while hot water is being
delivered.
1. RINSING UNDERWAY, PLEASE WAIT : the appliance performs
a rinse cycle from the co ee spouts;
2. EMPTY WATER TANK : extract the tank (A12) and empty it
18
(B8) until
CUP LIGHTING ap-
or disable-
to go back to the homepage.
(B8) until the display shows
(A7, g. 9). Press again the button
(B8) until
;
( g. 8);
the
WATER CIRCUIT
Advertisement
Table of Contents
Troubleshooting
