Whirlpool 400011239758 Instructions For Use Manual page 31

DISPLAYED MESSAGE
CLEANING UNDERWAY
PLEASE WAIT
MACHINE TOO HOT
POSSIBLE CAUSE
The appliance needs descaling.
The tubes inside the milk container (D)
must be cleaned.
The machine must be descaled.
The auto-start function is enabled.
Energy saving is enabled.
The appliance has detected impurities in
its internal circuits.
Using the stirrers continuously for long
periods may cause the appliance to
overheat
REMEDY
The descaling procedure described in section "Des-
cale" needs to be performed and/or the lter needs
replacing or removing as described in section "Water
softener lter".
Turn the froth adjustment dial (D1) to CLEAN ( g. 21).
The descaling procedure described in section "Des-
cale" needs to be performed.
To disable the function, proceed as described in sec-
tion "Auto-start
To disable energy saving, proceed as described in sec-
tion "Energy saving
Wait for the appliance to be ready for use again and
reselect the required beverage. Contact Customer
Services if the problem persists.
Wait for the appliance to cool down.
31
".
".
EN