Safety Precautions - LG AB-BL200X Owner's Manual

E-multiboard mounting bracket & stand
Table of Contents

Advertisement

Safety Precautions

- If you are a professional installer, please read this manual carefully before installing the product.
- After installing the product according to the manual, ensure that the user also reads the manual carefully.
After reading the manual, please keep it handy for future reference.
The product should be installed by a qualified professional
specified by the retail store.
Installing the product without a qualified professional is dangerous and may
cause injury.
When moving or replacing the product after installation,
contact a qualified installer specified by the retail store.
Installation or movement of the product must be carried out by a skilled
professional. If an unqualified person moves and installs the product, this may
cause safety issues.
Prior to installing the product, arrange the power cable and
signal cable to prevent damage during the installation.
Damaged cables may result in a fire, electric shock or damage to the product.
To stand the product upright, two or more people are
needed.
If you try to stand the product up alone, it may fall and cause an injury due to
its weight.
Follow the instructions in the manual to install the product.
If you do not follow the instructions, the product may not be installed properly,
causing serious injury or damage to the product.
Before installing the product, check whether the wall is strong
enough to hold the product.
Installing the product on a wall that cannot hold its weight may cause safety
issues.
Do not clean the product with wet towels, and do not use a heater or
humidifier underneath the product.
Moisture permeating into the product, including through steam and heat, may
result in a fire, electric shock or damage to the product.
Make sure that the power cord is removed from the outlet
before installing the product.
Otherwise, it may cause an electric shock or a fire.
Place the product on a flat, hard floor.
Leaving the product on a carpet or cushioned surface may cause the
product to fall and result in an injury.
If the external surface has stains or fi ngerprints, gently wipe the stained area only.
Do not apply excessive force to remove the stain. This may cause scratches or discoloration.
Warning
The product should be installed where its weight can be
supported.
If the product is installed on a weak surface, the product may fall and cause
injury.
Do not hang on the product or impact the product.
The product may fall and cause injury.
Do not stand or hang on the product when upright.
The product may fall and cause injury.
Caution
To install or adjust the height of the product, two or more people
are needed.
If you try to install or move the product alone, it may fall and cause injury or
damage to the product.
Keep the product away from sprinklers, sprinkler sensors, high-
tension wires and power sources. Do not install the product in a
location where vibrations or shock impacts are likely to occur.
Wear working gloves when installing the product. Do not use bare
hands.
Otherwise, it may cause injury.
Do not place the product on an unstable shelf or on a slanted or
vibrating surface.
The product may fall or turn over and cause injury.
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ab-bp200xAd-bl200hAd-bx200xAd-bp200h

Table of Contents