Appendix; Shielding Plate For Shield Connection Of The Motor Cable - Bosch Rexroth IndraDrive M Project Planning Manual

Rexroth IndraDrive M
10

Appendix

10.1 Accessories

Shielding Plate for Shield Connection of the Motor Cable

DOK-INDRV*-HMS+HMD****-PR01-EN-P
For the shield connection of the motor cable at the drive controller a
special shielding plate is available:
• for HMS01.1N-W0020...70 drive controllers:
SUP-M02-HMS01.1 (part no. 294976)
• for HMS01.1N-W0150, -W0210 drive controllers:
SUP-M02-HMS01.1-W0150 (part no. 296375)
• for HMD01.1N-W0020, -W0036 drive controllers:
SUP-M02-HMD01.1 (part no. 296558)
Note:
• Using the shielding plate guarantees optimum shield
contact of the motor cable. You should therefore always
use the shielding plate, where possible.
• The shielding plate is only available as an option.
• If you do not use the shielding plate you have to provide
good shield contact for the motor power cable by other
means (see page 7-21).
10-1
Appendix