Remote Control Settings; Record Settings - Philips DVDR1000 Instructions For Use Manual

Autoresume
The Autoresume setting only applies to the last 20 pre-
recorded DVD Video and Video CD discs, you played.
If Auto resume is 'On,' playback will start from the
point where it stopped the last time the disc played.
When Auto resume is 'Off,' the Recorder will start
playing from the beginning of a disc. In this case, you can
still resume from the last point it stopped when
appears on the TV screen by pressing 2 PLAY.
Factory setting is 'On.'
Low Power Standby
If Low Power Standby is 'On,' the Recorder will
consume minimum power in standby mode.
Factory setting is 'Off.'
Note:
When the Recorder is in low power standby mode:
- the signal of the equipment connected to the inputs will not
be passed through to the TV outputs,
- the Display will be Off,
- the Standby indicator on the Recorder will still light up in
standby mode.
-- ---
Access control
Status box
Auto resume
Low power standby
PBC
PBC
This feature allows you to disable or enable the PBC
(Playback Control) menu of Video CDs. See 'Playback' -
'Special VCD features.' Factory setting is 'On.'

Remote Control settings

Key sound
The Recorder beeps each time you press a button on
the Recorder or remote control.
Select 'Off' to disable this sound. The factory setting is
On.
Remote control used
If you want to use the remote control of a Philips DVD
player instead of the standard DVD Recorder remote
control to work the DVD Recorder, select 'DVD
Player.' Factory setting is 'DVD Recorder.'
All manuals and user guides at all-guides.com
off on off
Features
Enter code...
Off
On
Off
On
System information
When you move further down in the Remote Control
settings menu, the system status screen will appear.
Press v (up cursor) to go back.

Record settings

Record mode
By selecting a recording mode you define the picture
quality of recordings and the maximum recording time
for a disc.
Mode Picture quality
HQ best possible
(High Quality) picture quality
SP same picture quality
(Standard Play) pre-recorded as a
DVD
LP S-VHS
(Long Play) picture quality
EP better than VHS
(Extended Play) picture quality
You can only play a disc in the mode in which it was
recorded.
In the Record settings menu, select 'Record mode.'
R e c o r d s e t t i n g s
R e c o r d m o d e
A u t o c h a p t e r s
L P / E P r e c m o d e
Select the recording mode by pressing the t or u
(left or right cursor) buttons.
Confirm your selection by pressing the OK button.
Press SYSTEM MENU to return to the previous
menu.
Auto chapters
If Auto chapters is 'On,' every five to six minutes a
chapter marker (beginning of a new chapter) is inserted
during recording. This enables easy navigation through a
title during playback. Or, you can manually insert chapter
markers after recording. (see 'Managing disc content' -
'Edit in playback mode')
Total recording
time
60 minutes
120 minutes
180 minutes
240 minutes
E P
O f f
S p o r t
T o e x i t p r e s s
S Y S T E M M E N U
OPERATION 35