Circuit Breaker Protection; Safety Lock - Panasonic MK-F300 Operating Instructions Manual

CIRCUIT BREAKER PROTECTION

When the Circuit Breaker stops the motor due to overloading, turn off the Rotary Switch to OFF position "0" and
follow the instruction below:
1. Reduce the ingredients to less than half and resume operation.
2. If it still does not start, turn off the Rotary Switch to OFF position "0" again and resume operation.
3. If all else fails, please contact your nearest service cente .

SAFETY LOCK

The Safety Pin is designed to prevent the appliance from switching on when
- The Bowl Lid and the Bowl are not fully locked to each other.
- The Bowl is not fully locked to the Motor Housing.
Safety Pins
Note:
• Do not push the Safety Pin and Safety Lever with any instrument, stick etc.
• Do not pour liquids or ingredient at the Safety Pin and Safety Lever area.
• Keep the Safety Pin and Safety Lever area clean to avoid foreign particles accumulate on the area.
Actions above will ensure the Safety Pin and Safety Lever function properly. If not followed, it will
damage the parts related to the Safety Pin and Safety Lever.
The Safety Lever only
activates the Safety Pin
if the Bowl Lid is secured
on the Bowl.
Position A : Unlock
Position B : Lock
A
B
Fully locking steps :
Align the triangular mark on the Bowl
with the Motor Housing as in position A
shown. Turn it clockwise until 'click' sound
is heard and the triangular mark now
aligns to position B. To unlock, follow the
locking steps in reverse.