Configure Read Points
Click
in the selection menu to view the
Read points
configure the read point settings and view the current read points state.
Configure Read Points
Figure 4-16
Antenna Status
Displays the status of the reader read points. Click the read point status button to view and/or change the selected
antenna configuration.
•
Connected (green button):
Read point is enabled and an antenna is connected to the port.
•
Not Connected (red button):
Read point is enabled, no antenna is connected to the port.
•
User Disabled (yellow button):
Read point is disabled by the user.
Antenna Configuration
•
Choose ReadPoint
•
- User-specified read point description. Accepts up to 32 alphanumeric characters.
Description
•
User Configuration
using the port/antenna.
•
- Displays the list of air protocols the read point supports. Currently only EPC class1 GEN2 air
Air Protocol
protocol is supported.
•
- Click
Set Properties
These settings only affect the display. Use
- Select a readpoint (or all) to display the configuration.
- Enables or disables a specific read point. Disabling a read point blocks RF operation
to send the changes to the reader.
Set Properties
Commit/Revert on page 4-32
Antenna Status and Configuration
to save the changes.
Administrator Console 4 - 15
window. Use this window to