Speed Dial - NEC SV9100 Feature Handbook

Speed Dial – System / Group / Station
Operation
To store an Speed Dialing number (display telephones only):
1. Press Speaker.
2. Dial 753 (for system) or 754 (for group).
3. Dial system or group storage code.
Initially, there are 1000 System Speed Dialing codes. There are Group Speed Dialing
codes only if you define them in programming.
4. Dial telephone number you want to store (up to 24 digits).
Valid entries are 0~9, # and *. To enter a pause, press Transfer. To store a Flash,
press Recall.
5. Press Hold.
6. Enter the name associated with the Speed Dialing number.
See
7. Press Hold.
8. Press Speaker to hang up or repeat steps 3~7 to program another System /Group Speed Dial
To dial a System Speed Dialing number:
1. Go off-hook.
2. Press Redial.
- OR -
Press the Right Cursor key until the Group Speed Dial menu appears.
3. Dial the System Speed Dialing storage code.
Unless you preselect, Trunk Group Routing selects the trunk for the call. The system may
optionally select a specific Trunk Group for the call.
If you have a DSS Console, you may be able to press a DSS Console key to chain to a stored
number.
Table 2-8 Keys for Entering Names page 87
Page 46 of 60