NEC SV9100 Feature Handbook page 51

Speed Dial – System / Group / Station (continued)
To check your stored Speed Dialing numbers (display telephone only):
1. Press the Help key.
2. For System Speed Dialing, press Redial.
Dial the Speed Dialing Code (e.g., common code 001).
If the entire stored number is too long for your telephone display, press * to see the rest
of the number.
- OR -
For Group Speed Dialing, press the Group Speed Dialing key.
- OR -
For System Speed Dialing key, press the System Speed Dialing key.
3. Press the Exit key.
To display additional numbers, repeat from step 1.
- OR -
Press the Right Cursor key until the appropriate Telephone Book, System or Group Speed Dial
menu appears. (Use the Volume "Down" and "Up" keys to scroll through the stored numbers)
To store a Station Speed Dialing number (display telephones only):
1. Press Speaker.
2. Dial 755.
3. Dial the Station Speed Dial buffer number to be programmed (0~9).
1 = Station Speed Dial buffer 1
2 = Station Speed Dial buffer 2 "
0 = Station Speed Dial buffer 10
4. Dial the telephone number you want to store (up to 24 digits).
Valid entries are 0~9, # and *. To enter a pause, press MIC. To store a Flash, press Recall.
5. Press Hold.
" " " " "
Page 48 of 60