NEC SV9100 Feature Handbook page 50

Speed Dial – System / Group / Station (continued)
To store a System Speed Dialing number under a Programmable Function Key:
1. At multiline terminal, press Speaker.
2. Dial 751.
3. Press the key where the number is to be stored.
4. Dial 27.
5. Dial System Speed Dial Bin number to put under the key.
6. Press Speaker to hang up.
To dial a System Speed Dialing number under a Programmable Function Key:
1. At the multiline terminal, press Speaker.
2. Press the key, which has the stored number to be dialed.
The number seizes an outside line and dials out.
To dial a Group Speed Dialing number:
1. Go off-hook.
2. Press Redial.
- OR -
Press the Right Cursor key until the Group Speed Dial menu appears.
- OR -
Press the Group Speed Dialing key.
To preselect, press a line key in step 1 (instead of Speaker) before pressing Redial or
Speed Dialing key.
3. Dial the Group Speed Dialing code.
The stored number dials out.
Unless you preselect, Trunk Group Routing selects the trunk for the call.
If you have a DSS Console, you may be able to press a DSS Console key to chain to a
stored number.
Page 47 of 60