Motorola MW800 Series Manual page 12

12
Mic In
Audio Out
Display 1
Display 2
LAN
Serial 1
Serial 2
AUX
Video In
GPS
USB
WLAN
External input jack for Mono microphone for sound
recording.
For connecting headphones, external speakers with power
amplifier or audio recording device.
Connects the CPU to the Display. Carries RGB, USB and
audio to the screen.
Connects the CPU to the Display. Carries DVI for flat
screen interface. Also carries RGB, USB and audio to the
screen with additional cable adapters (optional).
NOTE: not applicable for model F5217A.
For connecting the LAN cable. Includes a Link and Active
indicators.
For connecting a serial device such as Motorola's VRM
modems, printer, mouse, etc. The connection requires a
COTS (Commercial Off-The-Shelf) cable (not supplied).
Additional serial connection in model F5217A only.
Connects vehicle ignition switch, General Purpose I/Os (2
In, 2 OUT), additional USB port, internal modem
programming signals as well as 5VDC and car battery
voltage outputs.
NOTE: model F5217A provides vehicle speed and
direction inputs and does not provide additional USB port.
Composite Video input for connecting external VCR or
video camera.
Connects GPS antenna to the internal GPS receiver
(optional).
Each port connects a USB 2.0 or USB 1.1 device.
Connects RF antenna (SMA) to the (optional) internal
WLAN radio (802.11b/g)