Huawei TP1102 Series Administrator's Manual page 25

HUAWEI TP1102 Telepresence
Administrator Guide
Table 3-1 WLAN connection parameters
Parameter
Network
settings
Password
Proxy settings
IP settings
IP address
Network prefix
length
Gateway
DNS
Procedure
Step 1 After the wireless connection is successful, start the telepresence host.
The connection dialog box is displayed on the touch panel.
Step 2 Tap Settings.
The telepresence host connection settings screen is displayed.
Step 3 Enter the telepresence host IP address, connection protocol, service set identifier (SSID), and
touch panel user name and password.
Step 4 Tap Save to connect to the telepresence host.
----End
Follow-up Procedure
After the touch panel restarts, the telepresence system home screen is displayed, as shown in
Figure
Issue 01 (2013-07-15)
Setting
Set it to Manual.
Specify the login password for the wireless network. The default value
is 22rTP1102.
Set it to None.
Set it to Static.
Specify the internal IP address of the touch panel, for example,
172.16.21.65.
Specify the length of the internal IP address subnet mask, for example,
24.
Specify the IP address of the wireless router, for example,
172.16.21.64.
Specify the IP address of the domain name server (DNS), for example,
8.8.8.8.
If there are multiple telepresence hosts and the touch panel is already connected to a telepresence host,
you must modify connection parameters to enable the touch panel to connect to another telepresence
host.
The default user name and password for the touch panel are hid. To change the password, log in to the
Telepresence System Manager and choose System Settings > Users. To obtain the SSID
(case-insensitive), tap Apps > Settings > Wireless & networks > WLAN Settings on the touch panel.
3-1.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Using the Touch Panel
18