Download Print this page

Siemens TLX Installation Instructions

Wireless transceiver tool
Hide thumbs Also See for TLX:

Advertisement

Quick Links

Wireless Transceiver Tool (TLX)
(Version 1.x)
Channel
Network I.D.
Figure 1. Wireless Transceiver Tool (TLX).
Product Description
The Wireless Transceiver Tool (TLX) is a wireless
transceiver that can be used before, during, and
after installation for communication surveys, network
checkout, and troubleshooting.
®
Through Microsoft
HyperTerminal, you can view
the WFLN information that the TLX gathers, such as
node configuration data and communication quality.
The TLX connects to a laptop computer (cable P/N
540-143) and uses 24 Vac power.
Item Number: 563-032, Rev. BA
RS-232
24 Vac 1.2VA
E H N
Installation Instructions
Product Numbers
563-006
Wireless Transceiver Tool (TLX)
with Direct Mount Antenna, Power
Cable, and 24 Vac Transformer
(Version 1.x)
Accessories
540-143
MMI Cable (9-pin to RJ-11, RS-232)
Expected Installation Time
3 minutes
Required Tools and Materials
Small flat-blade screwdriver
Prerequisites
The Channel switch on the TLX is set to the
WFLN Channel.
The Network ID switch on the TLX is set to the
WFLN Network ID.
The TLX is within wireless communication
range of the WFLN.
Document No. 563-032
January 12, 2007
Page 1 of 4

Advertisement

loading

Summary of Contents for Siemens TLX

  • Page 1 ® Through Microsoft HyperTerminal, you can view • The Network ID switch on the TLX is set to the the WFLN information that the TLX gathers, such as WFLN Network ID. node configuration data and communication quality. The TLX connects to a laptop computer (cable P/N •...
  • Page 2 6. Set communications parameters, as follows: to the TLX box. Connect using: Direct to Comm x 2. Terminate power to the TLX (24 Vac 1.2 VA (where x is the number of the Comm port connector). where the laptop computer cable will connect)
  • Page 3 Displays the received signal strength values for the last hop of a message path. ENERGY Scans the current RF energy values of the radio channels. REBOOT Reboots the device. See theTLX User Guide (563-001) for more information. Siemens Building Technologies, Inc. Page 3 of 4...
  • Page 4 The Wireless Transceiver Tool (TLX) is to be installed interference to radio communications. However, or replaced by professional installation personnel there is no guarantee that interference will not occur only.