Related Manuals for Huawei S5720I-6X-PWH-SI-AC
Summary of Contents for Huawei S5720I-6X-PWH-SI-AC
- Page 1 Quick Start Guide S5720I-6X-PWH-SI-AC and S5720I-10X-PWH-SI-AC Issue: 02 (2018-10-30) Part Number: 31500ACG HUAWEI TECHNOLOGIES CO., LTD.
-
Page 2: Packing List
WARNING and CAUTION items do not cover all the safety precautions and are only supplementary to the safety precautions. Follow all the safety precautions and instructions provided by Huawei. The safety precautions outlined in this document are only requirements of Huawei and do not include general safety requirements. Huawei is not liable for any consequence that results from violation of regulations pertaining to safe operations or safety codes pertaining to design, production, and equipment use. -
Page 3: Commissioning The Switch
Start the web browser on the computer, enter https://192.168.1.253 in the address box, and press Enter to display the initial login page. Enter the default user name admin and default password admin@huawei.com and select the language on the login page. Then click GO or press Enter. - Page 4 Configuration Item Description Management IP Address Mandatory. Enter the management IP address of the switch, in dotted decimal notation. Mask Mandatory. Select a subnet mask from the drop-down list box. Old Password Mandatory. Enter the old password for the default web user. WEB User Password Mandatory.
-
Page 5: Installing The Switch
Press Enter in subsequent steps until the following information is displayed on the terminal simulation software, and then enter the user name and password. The default user name for the first login is admin and the default password is admin@huawei.com. You must change the password after login. Login authentication... - Page 6 Step 4 Install the installation kit (mounting side) onto the pole. Ensure that the top of the installation kit is flush with the top of the positioning sticker. A standard hose clamp is used for poles with a An optional hose clamp is used for diameter of 48 mm to 114 mm.
- Page 7 Space Planning Unit: mm 1200-1600 Installation Procedure Step 1 Step 2 Mark the four drilling positions on the installation Drill holes and install expansion bolts. kit (mounting side).。 Drilling position Ø8 Hammer drill Step 3 Install the installation kit (mounting side) Step 4 Install the installation kit (device side) onto onto the wall.
-
Page 8: Cabling The Switch
Step 5 Mount the switch onto the wall. M6 (1 PCS) 3 N·m 7 Cabling the Switch NOTE The cables connected to the switch must be routed along the inner side of the pole. The ground cable must be purchased separately. 7.1 Connecting the Ground Cable to the Switch Step 1 Connect one end of the ground cable to the switch. - Page 9 Maximum length of a fiber that can be coiled up in a fiber management tray (FMT): 20 m (for a single bare fiber) or 1 m (for a single fiber pigtail). If two fibers are used, this length is halved. The S5720I-6X-PWH-SI-AC does not support 110 V input or 110 V output.
-
Page 10: Verifying The Installation
8 Verifying the Installation 1. Check whether the installation kit is securely installed and whether all screws are tightly secured. 2. Check whether all cables are reliably connected with correct polarity and no short circuit. 3. Check whether there are any empty screw holes. If there are, install screws in the empty holes. 4. - Page 11 Technical Support I Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders. Copyright © Huawei Technologies Co., Ltd. 2019. All rights reserved.