Lubrication; Greasing The Machine - Toro Sand Pro 3040 Operator's Manual

Lubrication

The machine has grease fittings that must be
lubricated regularly with No. 2 lithium grease after
every 100 hours of operation.
Lubricate the following bearings and bushings:
•
Front wheel bearing (1)
Figure 19
•
Traction-pedal pivot (1)
Figure 20
•
Rear hitch (5) (Figure
Figure 21
(Figure 19)
(Figure 20)
21)
•
Steering cylinder rod end (1)—Model 08705 only
(Figure 22)
g002714
•
Steering pivot
Note:
The flush fitting on the steering pivot
23) requires a grease gun nozzle adapter. Order
Toro Part No. 107-1998 from your authorized Toro
distributor.
g002715

Greasing the Machine

Service Interval: Every 100 hours
g002716
1. Wipe the grease fitting clean so that foreign
matter cannot be forced into the bearing or
bushing.
2. Pump grease into the bearing or bushing.
3. Wipe up excess grease.
23
Figure 22
(Figure 23)
Figure 23
g002717
(Figure
g007452