Setup Options; Method Of Setting Card Into Sd Card Slot; Connecting To A Computer - Toshiba 2032SP Online User's Manual

Setup Options

Method of Setting Card into SD Card Slot

Inserting a card:
Turn off the power.
1.
Insert the card with its contact surface (metal contact surface) facing
2.
backward into the device.
Contact surface
Note:
An SD dummy card is loaded in the SD card slot at purchase.
Remove the SD dummy card before inserting the card.
Removing a card:
Make sure that no application is accessing the SD card.
1.
Turn off the power.
2.
Lightly press down on the card until a clicking sound is heard. The card
3.
will pop out slightly from the slot.
Pull the card straight up to remove.
4.
Section 2: Understanding Your Device
26 2A: Your Device - The Basics

Connecting to a Computer

Before connecting your device to a computer, check the following.
ActiveSync ® is on your computer. (For installation procedures of
ActiveSync ® , see page 85.)
The device is turned off.
The computer you're connecting has an available USB port for the
cradle.
To connect using the supplied USB cradle:
Connect the USB cradle to your computer as shown in the illustration
1.
below.
Insert the device into the USB cradle.
2.
Section 2: Understanding Your Device
USB port
2A: Your Device - The Basics 27