Table of Contents
Advertisement
Resetting
Reset is equal to "Restart" on a computer. Reset only in unusual
circumstances such as when the screen freezes and doesn't respond to
tapping. Information not saved prior to resetting will be deleted.
When your device is reset, phone functions are ended.
To reset, press and release the Reset Switch while the power is on. Once
reset, the Today screen appears.
Note:
If the function cannot be restored even after resetting, initialize
your device (see "Clearing Memory" on page 144).
When the power is on, press the Reset Switch with the stylus, then
release. By doing so, reset is made and the Today screen appears.
Clearing Memory (Initialization)
Initializing the device returns it to the status when it was originally purchased.
Note:
Initializing the device deletes all stored data, except built-in
programs.
Before initialization, we recommend storing the memory data of the
device into your computer or a storage card.
Note:
Before initialization, remove a storage card.
To initialize:
Turn off the power.
1.
Press the Power button while pressing and holding the Reset Switch
2.
with the stylus, then release the Power button.
Release the Reset Switch.
3.
When initialization is complete, the welcome screen appears. Proceed
with setup.
Section 2: Understanding Your Device
144 2L: Additional Information
Specifications
External
3 in. x 5 in. x 3/4 in. (excluding protrusion part)
dimensions
(77.5(W) x 127.5(H) x 19.5(D) mm)
Operating
Temperature: 32°F to 104°F (0°C to 40°C),
conditions
Humidity: 30 to 80% RH
• Temperature capable of charging: 41°F to 95°F
(5°C to 35°C) (According to the operating status,
the charging may pause even when the ambient
temperature is below 95°F (35°C).)
Built-in battery
Advanced Lithium Ion battery
Battery Life
Internal Lithium Ion Battery provides up to 1.5
hours of continuous talk time or up to 100 hours
of continuous standby time in digital mode.*
* These times are approximate, and depend on
network configuration, signal strength,
operating temperature, features selected, and
voice data and other application usage patterns.
Processor
Intel
®
StrongARM SA-1110 206MHz
Memory
32MB SDRAM
Display
Reflective color TFT, 240x320 pixels, 65,536 colors
Interface
SD card slot
Possible to insert SD memory card or SDI/O card
Note:
The security function of the SD memory
card is not usable. Data encrypted by
the SD memory card security function-
compatible equipment is not usable.
Infrared port
Based on IrDA Ver.1.2,
Maximum data transmission speed: 115 kbps
Stereo headset
ø2.5mm, five poles stereo mini plug
jack
Cradle connection
port
AC Adapter jack
Section 2: Understanding Your Device
2L: Additional Information 145
Advertisement
Table of Contents
